sing our proprietary PVC formulation called Arbosol
®, InsulBoot
® provides a high insulation factor, extreme temperature resistance, and substantial UV protection.
InsulBoots® are moulded from a polyvinyl chloride (PVC) material which produces a seamless, heavy duty, resilient
moulded product. It is formulated specifically for electrical applications at high voltages.
Some Properties of Arbosol®
We formulate and manufacture our materials in house to ensure consistent high quality.
| Tensile Strength |
ASTM D-638 |
1500 psi min. |
| Elongation |
ASTM D-638 |
300% min. |
| Durometer Hardness |
ASTM 2240 |
75 +/- 5 Shore A |
| Tear Strength |
ASTM D-1004 |
400% |
| Max. Operating |
|
221° F (105° C) |
| Low Temperature Flex |
|
-20° F (-29° C) |
| Dielectric Strength |
500 volts/MIL |
Meets STD. C37.20.2 -1999 I.E.E.E. Standard for Metal Clad Switchgear Table 1 |
Recommended Thickness of InsulBoots®
| InsulBoot Thickness |
Test Voltage - KV |
| Nom. |
Min. |
5 kv |
| 0.090" |
0.060" |
| 0.125" |
0.090" |
15 kv |
| 0.125" |
0.090" |
18 kv |
| 0.125" |
0.090" |
20 kv |
| 0.156" |
0.125" |
27 kv |
| 0.250" |
0.200" |
38 kv |
Environmental Applications
Insulboots® are made with UV inhibitors and may be used for outdoor or indoor applications.
Disclaimer: This data is based on tests believed to be reliable and is given for information only. Since conditions of use are beyond our control, we cannot and do not assume any liability in connection with the use of the data or suggestions.
